tipo kodai kazkokie buna kai perki traktoriu, gedimu kur kompas rodo tie tipo paslaptis keik girdejau
tie kodai jokia paslaptis jie paprasciausiai uzkoduoja tam tikra gedima, kadangi traktoriaus monitoriuje visas klaidos aprasymas netelpa.
pasiziuri koks klaidos kodas, tada imi i letenas zinyna ir pirmyn
pavyzdziuiklaidos kodas 1
ERROR CODE 1 - ENGINE OIL PRESSURE SENDER SHORT OR OPEN CIRCUIT
Repair
Location
Schematic
Possible failure modes:
Faulty sender
Faulty harness
Faulty instrument cluster
Solution:
NOTE: When the cause of the error code has been rectified, clear the error code and test the system for normal operation.
Check the instrument cluster.
A. Turn the keystart OFF. Disconnect the oil pressure sender connector C003 . Short the signal out between connector C003 pin B (G/K) and pin C (G/K) . Turn the keystart ON. If error code 1 is still displayed, continue to step 2.
B. If error code 1 is not displayed and the oil pressure display indicates maximum, continue to step 3.
Check for an open or short circuit.
A. Turn the keystart OFF. Disconnect the instrument cluster connector C081 . Check between connector:
C003 pin B (G/K) and C081 pin 2 (G/K)
C003 pin C (Y/S) and C081 pin 1 (Y/S)
C003 pin A (G/W/B) and ground
If an open or short circuit is indicated, repair or replace the harness as required.
B. If the harness is okay, remove and replace the instrument cluster.
Check for +5 Volts.
A. Turn the keystart ON. Measure the voltage between connector C003 pin B (G/K) and pin A (G/W/B) . If the voltage indicated is not approximately +5 Volts, repair or replace the harness as required.
B. If the voltage is approximately +5 Volts, remove and replace the oil pressure sender.